Rane DA 216a (1999 version) User Manual download pdf

DA 216a

DISTRIBUTION AMPLIFIER

Data Sheet-1

General Description

The Rane DA 216a Distribution Amplifier is a two-input,

sixteen-output splitter/distribution amplifier. The DA 216a is

capable of providing sixteen discrete balanced outputs from

one or two balanced mic-level or line-level inputs. The level

of each output is individually adjusted via one of the sixteen

screwdriver Output Level controls on the front panel. Each

output may be assigned to either or both inputs via front

panel accessible slide switches.

The Master A and B Level controls affect the overall level

of each input. In other words, they allow all assigned outputs

to be turned up or down at once. LEDs indicate an Overload

(OL) at either the inputs or at the internal gain stages.

Each input is set to either Mic or Line level via the rear

panel Input Pad pushbutton. The Input Gain pushbutton

switches provide a microphone input with +60 or +40 dB of

gain, or a line input with +20 or 0 dB of gain. With Input

Gain, Master Levels and Output Levels, any reasonable input

signal may be adjusted to a nominal +4 dBu and still have 17

dB of headroom. The Phantom Power switch provides +15

VDC for condenser microphones. Any input assigned to line-

level has this phantom voltage turned off automatically. A

rear-panel LED indicates when the Phantom Power is

engaged.

Each output stage incorporates a high-current balanced

output line driver for driving long lines with optimal perfor-

mance.

Features

• New!

A, B, A&B Output Assign Switches

• Sixteen Balanced Outputs, Individually Assignable

• Two Balanced Inputs

• Studio Grade Low Noise Input Amp

• Input Overload Indicators

• Mic/Line Input Switches

• Gain Switches: 40/60 dB Mic, 0/20 dB Line

• Phantom Power Switch

• Master Input and Individual Output Level Controls

• Stable High-Current Line Drivers

• All Outputs Capable of Driving 600 Ohm Loads Simultaneously

• #6 Screw Terminals

• UL/CSA/CE and 100/120/230 VAC Remote Power Supplies

DATA SHEET

1 2 3 4

Summary of Contents

Page 1 - DATA SHEET

DA 216aDISTRIBUTION AMPLIFIERData Sheet-1General DescriptionThe Rane DA 216a Distribution Amplifier is a two-input,sixteen-output splitter/distributio

Page 2 - Features and Specifications

DA 216aDISTRIBUTION AMPLIFIERData Sheet-2Parameter Specification Limit Units Conditions/CommentsMic Input Impedance 1.82k 1% ohms Balanced 909 + 909Li

Page 3 - Block Diagram

DA 216aDISTRIBUTION AMPLIFIERData Sheet-3ApplicationsUse of the DA 216a is straightforward. Connect balancedinputs to the Input screw terminals. Follo

Page 4

DA 216aDISTRIBUTION AMPLIFIERData Sheet-4All features & specifications subject to change without notice. DOC 104637 PN 11888©Rane Corporation 108

Comments to this Manuals

No comments

Rane DA 216a (1999 version) User Manual

Browse online or download User Manual for Audio Rane DA 216a (1999 version). Rane DA 216a (1999 version) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Rane DA 216a (1999 version)