Rane MM 12 Operations Instructions download pdf (Page 2)

Manual-2

FRONT PANEL DESCRIPTION

 MAIN MIC ON switch: puts the Main Mic signal into the mixer signal path. When the switch is pressed in, the Main Mic

is on and the adjacent red indicator blinks.

 Front panel MAIN MIC input: accepts a balanced microphone with an XLR connector. A parallel Main Mic Input is on the

rear of the unit. Do not connect microphones to both front and rear Main Mic inputs.

 MAIN MIC LEVEL control: adjusts the level of the Main Mic Input.

 MIC OVERLOAD indicator: monitors both Main and Aux Mic Inputs, before and after the Mic EQ. It lights when the

signal exceeds the Mic section’s output capability (3 dB below clipping). Occasional flickering is acceptable; however,

steady lighting requires a reduction in the Mic LEVEL control to prevent distortion.

 AUX MIC ON switch: puts the Aux Mic signal into the mixer signal path. The adjacent red indicator blinks when the

switch is pressed in, indicating that the Aux Mic is on.

 AUX MIC LEVEL control: adjusts the level of the Aux Mic Input.

 MIC EQ controls: contour the frequency response of the summed Main and Aux Mic Inputs.

 Source Input Select switch: selects either a Phono/Line or Line Input for the Source. In the center position the Source

Input is muted.

 Source EQ controls: contour the frequency response of the selected Input.

 Source Input fader: controls the level of the selected Input.

 Source ASSIGN PRE/POST CROSSFADER switches: are provided for Inputs 1 and 4. In the PRE (up) position, this

Input is routed to the Crossfader. In the POST (down) position the Input bypasses the Crossfader.

 ACTIVE CROSSFADER: controls the relative output level from the summed A and B Mixes. When the fader is at its far

left, only the A Mix is heard from the Outputs. As the fader is moved toward the right, the amount of B Mix is increased and

the amount of A Mix is decreased. When the fader is centered, equal amounts of A and B Mixes are routed to the Outputs.

Fully right is all B Mix at the Outputs.

1 2 3 4 5 6 7 8 9 10

No comments

Rane MM 12 Operations Instructions Page 2