Rane TTM 57SL Operator's Manual download pdf (Page 35)

Manual-35

Hardware panel setup

is area contains settings dedicated to the TTM 57SL.

Control source

Any of the four inputs on the TTM 57SL can be set to control

Scratch LIVE. Use these two knobs to choose the inputs that are

used to control Scratch LIVE.

Expand library on track scroll

With this option turned on, the hardware panel will hide tem-

porarily while you are using the mixer to scroll through your

library.

Flashing deck indicator

e ﬂashing deck indicator shows which Virtual Deck is selected

by the deck button on the mixer. When this option is on, a red

border will ﬂash around the selected virtual deck.

Phono sensitivity

Set the phono sensitivity at the level of your cartridge (see your

cartridge documentation for the value). is will make your

turntable inputs the same level as your line inputs.

Transform direction

e Joysticks also double as transform switches. To change the

joystick from software control to transform, press the joystick

down – as if you were trying to push it down into the mixer,

you’ll here a click – and hold it down until the green LED lights.

e 8 check boxes around the joystick image show the direc-

tions you can move the joystick. e audio will cut out when the

joystick is moved in a direction that is checked.

Latch kill switches

e EQ kill switches on the mixer can be set to be either mo-

mentary (on while the button is held down) or latched (on until

the button is pressed on). Select this option to keep the kills on

until you press the button again.

Reset controls to defaults

Each of the software control assignments can be customized.

Click this button to reset all the control assignments/mappings

to their default state.

Footswitch

e TTM 57SL supports 1, 2 or 3 button footswitches. Click on

the number that corresponds to your foot switch.

Save to mixer

Click this button to transfer settings to the mixer. ese settings

will reside in the mixer when it is used without Scratch LIVE

running and attached. e following settings are transferred to

the mixer:

• Transform direction.

• Filter type.

• Latched or momentary kill switch preference.

• Phono sensitivity.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Rane TTM 57SL Operator's Manual Page 35

Comments to this Manuals

Related products and manuals for Audio mixers Rane TTM 57SL