Rane TTM 57SL Operator's Manual download pdf (Page 21)

RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

Use cue points in Scratch Live to mark

and trigger different parts of your tracks.

The cue point markers are saved with the

le in the track’s ID3 tag. This means they

will be present each time you load the

track.

Setting Cue Points

You can set up to ve cue points for each

track. Click on the + button to place a

cue point, or use the keyboard shortcuts

below. A cue point will be set at the

current playhead position of the track and

can occupy any of the 5 slots.

Use the keyboard shortcuts: ctrl-

comma (for left) and ctrl-period (for right)

to place cue points in chronological order.

Alternatively, use ctrl-1 through 0 to set a

specic cue point, i.e., to set a cue point on

the Left Deck in slot two, press ctrl-2.

Notice that the stripe on the Virtual

Deck jumps to the 12 o’clock position and

changes color when you set a cue point

– you are at the cue point when the stripe

is one solid color and at the 12 o’clock

position. As the track plays on beyond

the position of the cue point, the colored

bar shortens by a fth for each rotation.

Likewise, as you approach the cue point,

the color will grow by a fth each rotation.

For example, the picture below shows

the track just before the end of the 5th

rotation before the cue point.

Cue Points Looping

You can save up to

9 loops per track;

these loops are saved

in the le, and will be present when you

reload the track. To make a loop, set the

in-point by clicking the IN button, and the

out-point by clicking the OUT button. To

turn the loop on or off, click the LOOP

button. If you want the playhead to jump

to the start of the loop when you enable

the loop, hold the control key and press

the LOOP button.

To adjust the in-point of the loop, click

the IN button. You can use the arrow keys:

left arrow to move the in-point towards

the start of the track, right arrow to move

the in-point towards the end of the track.

Hold down the shift key while pressing the

arrow key to make coarse adjustments.

Click the IN button again to save the in-

point. The same applies to adjusting the

out-point.

You can also use the control vinyl (or

CD) to adjust the in- and out-point. Click

the IN button, then move the control vinyl.

Moving the vinyl will adjust the in-point.

Once you are happy with the new in-point,

click the IN button to save, and release

the control vinyl.

The control vinyl will go back to

controlling playback once the record

is back up to normal speed. Using the

control vinyl to adjust loop end points is

optional — to turn this feature off, disable

the Adjust loops with vinyl option in the

Playback tab of the Setup screen. There

are 9 available loop slots per track. If a

loop is set in a given slot, the background

(behind the loop number) will be green.

TIP: Zoom in on the waveform using the

– and + keys and ‘scrub’ to the desired

position for greater accuracy when

setting cue points.

Enable Hot Cues

To turn on hot cues, check Enable hot

cues in the Playback tab on the Setup

screen. When hot cues are enabled, you

can set cue points simply by pressing the

number keys 1 through 0 (no ctrl modier

required). Note that you can only add cues

this way if the cue point slots are empty.

See “Enable Hot Cues” on page 21.

Triggering Cue Points

Click the arrow to the left of each cue

point to jump to it (REL and INT mode

only). You can also jump to cue points

using keyboard shortcuts – 1 through 5

for the cue points on the Left Deck, and 6

through 0 for the Right Deck cue points.

Editing Cue Points

To remove a cue point, use the x button

on the right side of the cue point panel.

You can also over-write cue points by

using the shortcut keys ctrl-1 through 0.

Customizing Cue Points

To change the color of a cue point, click

on the colored square and choose a new

color from the drop down menu.

To name your cue point, double click

on the “time” eld. You can now edit and

name this cue point to whatever you like.

You can also drag and drop cue points

to change their order in the list. If you wish

to have the cue points sorted by time,

check Sort cues chronologically in the

Playback tab on the Setup screen. If you

load the same track onto both Decks, you

will be able to add or modify cue points

from either Deck.

When you jump to a cue point in INT

mode while paused, the track will play

from the cue point for as long as the key

or mouse button is pressed, after which

the playhead returns to the cue point. If

this is done using the keyboard while the

track is playing in either INT or REL mode,

the cue point will be repeatedly triggered,

producing a stuttering effect.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comments to this Manuals

No comments

Rane TTM 57SL Operator's Manual Page 21

Comments to this Manuals

Related products and manuals for Audio mixers Rane TTM 57SL