Rane TTM 57SL Operator's Manual download pdf (Page 32)

RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

Scratch Live allows you to record one of

six stereo signals from the TTM 57SL:

• Main Mix

• AUX BUS (sum of MIC, AUX, FlexFX

Return)

• PGM 1 (a) Pre-Fader

• PGM 1 (a) Post -Fader

• PGM 2 (b) Pre-Fader

• PGM 2 (b) Post -Fader

Stereo recording is possible even while

using two stereo vinyl control inputs.

1. Click on the  triangle for the drop

menu displaying the three record Input

Sources.

2. Select the desired source and press the

red record icon to start recording.

3. The record icon ashes while recording

and the display shows the elapsed

recording time.

4. Press the record icon again to stop the

recording.

5. To save the recording, type in a name

for the recording and click the save icon.

6. The recording is automatically placed

in a crate named “RECORDED”. If the

crate does not already exist, it will be

created automatically.

7. To start a new recording without saving,

simply click the record button again.

Recording

Recordings can be loaded onto the

Decks, renamed, and managed like other

les. Recordings are saved as 16-bit, 44.1

kHz stereo AIFF les.

Recordings are saved in “My

Documents\My Music\_Serato_\

Recording” in Windows XP, “Libraries\

Music\_Serato_\Recording” in Windows 7,

and “~/Music/_Serato_/Recording Temp”

on a Mac.

Record Gain Knob

Adjust the record level using this knob.

The meter tells you the level of your audio.

Ideally the meter should sit just below the

red, meaning your signal is as loud as it

can be without clipping.

NOTE: If you turn the record gain

knob down and the red clip led is still

illuminated, this means the signal is

clipping the input of the TTM 57SL. Turn

down the mixer’s GAIN control.

TIPS

• The keyboard shortcut ctrl-n turns

recording on and off.

• You can load a recording without saving

it using the short cut keys shift + left

arrow to Virtual Deck 1 or shift + right

arrow to Virtual Deck 2.

Recording directly with the TTM 57SL

soft controls is possible using the Record

Group and an optional footswitch.

NOTE: Recordings over 3 hours are

automatically split into individual ﬁles.

LiveFeed

LiveFeed allows you to stream any of the

standard record sources (mix, aux, a pre,

a post, b pre, b post) to a Virtual Deck.

You can then instantly play the recording

back just like a normal audio le - you can

scratch it, speed it up, slow it down, set

loops and set cue points.

There are two recording options,

Normal and Gated. The Normal option

means recording will begin as soon as

the normal Livefeed track is loaded to the

Virtual Deck. The Gated option means that

after a Gated Livefeed track is loaded,

recording only begins once the set gate

level is exceeded (thus avoiding periods

of silence). You can set the gate level

by clicking the dropdown menu in the

LiveFeed lename. A lower gain setting

makes the gate more sensitive.

The amount of time available to record

is determined by your audio cache setting.

The track overview display shows the

amount of usable audio you have to play

with from the recording. Click anywhere

in the track overview display to jump to

your desired position in the recording. See

“Audio Cache” on page 37.

Locate the LiveFeed les in your library.

Type “livefeed” into the search box to see:

LiveFeed - Rane TTM 57SL Record Source

(Gated).

Load the desired LiveFeed le to either

Deck. The waveforms will start to build

in the track overview and main waveform

display as the input is recorded, you

can now use the recording as normal.

Performing a needle drop on the record

brings the playhead back to the “now”

position in the audio stream.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Comments to this Manuals

No comments

Rane TTM 57SL Operator's Manual Page 32

Comments to this Manuals

Related products and manuals for Audio mixers Rane TTM 57SL